PLH3D Lens Regulator

This is a tool designed for adjusting the focus of the laser beam on our PLH3D-Series with the High-Resolution Lens. It is valuable to quickly change the focus of the beam when a different working distance or focus spot size is desired, often depending on the material properties or other constraints of the application. 

Reference: 001414

Manufacturer:

Available quantity: 178 Items

    $25.00 tax excl.

    Accessories

    • This High-Resolution Lens can be used to variably focus or collimate the laser light with reduced aberration due to its triplet (three-element) design. Its long focal length of 8.0 mm allows it to variably focus laser light to a small spot. This lens can be purchased as a replacement for use with PLH3D-Series laser...

    Product Description

    - Compatible with PLH3D-Series Laser Heads using the High-Resolution Three-Element Lens
    - Adjust the beam spot size and working distance without any additional tools
    - Machined from 6000-Series Aluminium

    This accessory tool is intended for adjusting the focus of High-Resolution 450 nm Mounted Triplet Lens, which is included with many of our PLH3D-Series laser heads, as well as available as a separate accessory.

    It is useful to quickly change the focus of the beam when a different working distance or focus spot size is desired, often depending on the material properties or other constraints. A smaller beam spot (shorter working distance) is often used for higher resolution engraving, higher speed engraving, cutting materials that are either, or any time a higher power density is preferred. A larger beam spot is typically favored for engraving a wider line, cutting a thicker material or when a longer working distance is needed.
     

    Technical Data

    MaterialAluminium
    Weight1,5 g