New
Hobby PLH3D-CNC Adapter Kit

Hobby PLH3D-CNC Adapter Kit

The PLH3D-CNC Hobby Adapter designed for most of the CNC/3DP machines. Easy and quick connection to almost any type of the CNC controller output connector and any type of signal modulation. Everything you need is included!

Reference: 001945

Manufacturer:

Available quantity: 20 Items

$69.00

Individual Kit Parts

Product Description

About the Hobby PLH3D-CNC Adapter Kit For All CNC Machines

The Hobby PLH3D-CNC Adapter Kit works with all PLH3D-6W laser heads and allows to connect them to all types of the CNC machines. All the parts are simple in connection and don't need any soldering or cutting the cables.

The parts included in the Universal PLH3D Series Adapter For All CNC Machines

  1. 19 V, 2.5 PSU (comes with European, North America and UK AC plugs)
  2. 5-meter long electrical wire with pins and terminal block
  3. Connector strip for lengthening the wires if needed
  4. On-cable switch
  5. Universal set of 7 types of wires for all types of output connectors

Key features of the Hobby PLH3D-CNC Adapter Kit:

  1. Simple and quick electrical connection.
  2. Plug&Play adapter, no soldering required. 
  3. Can be connected to most of the CNC/3DP

7 types of wires - universal connectors with terminal block

Description of connectivity wires for different physical connectors available in your CNC machines. Simply choose the one which fits your machine!

Universal Kit Pins

1. Male gold pin header connector -  allows connecting to a gold pin female connector. One needs to find two slots responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.  

2. Tinned copper wires -  allows connecting to SMD or THT of the CNC controller. One needs to find two vias/holes or parts on the PCB responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply solder the wires to the part of the PCB board of the controller, the blue wire to the GND signal and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.

3. Female gold pin header connector -  allows connecting to a gold pin male connector. One needs to find two pins responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.  

4. Insulated wire end sleeves - allows connecting to terminal blocks and screw connectors. One needs to find two terminals of a connector responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply insert the blue wire to the GND terminal and red wire to the modulation signal terminal which is used by the machine to operate the laser and tighten the screws. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.

5. Male D-SUB connector -  allows connecting to any kind of a female D-SUB connector. One needs to find two slots responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter. 

6. Press fit male gold pin header connector -  allows connecting to a gold pin male connector. One needs to find two vias/holes in the PCB responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply press the connector into the via/hole in the PCB board of the controller, the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.    

7. Female D-SUB connector - allows connecting to any kind of a male D-SUB connector it can also be used to connect to other types of connectors which are using male pins. One needs to find two pins responsible for modulation signal. Analog output 0-5 V or Analog output 0-10 V or TTL/PWM output, and GND. Simply plug the blue wire to the GND and red wire to the signal which is used by the machine to operate the laser. Use the terminal block electric strip to connect the blue and red wire with labeled wires of the Universal Adapter.

Reviews

Write a review