1. Locate the spindle mounting plate. There are 4 hex screws attached with nuts on the back.

2. Attach the plate onto the T slot rail at the front of your spindle by sliding in the nuts. Align the plate to the spindle and fasten the screws. 

3. Attach the magnetic docking station for the cutting laser (the Opt Lasers Grav LaserDock) onto the plate by installing the two hex screws. A detailed video instruction can be found on Youtube:

4. Don't forget to subscribe to our Youtube channel for exciting first-hand news and video guides.

5. Attach Opt Lasers Grav cutting laser by simply aligning the magnets. It will fit securely..