PLH3D-2W Engraving Laser Head
Delivery time: days
Manufacturer: Opt Lasers
Available quantity: 10 Item Items Last items in stock!
About PLH3D-2W engraving laser head
PLH3D-2W is a PLH3D medium power professional engraving laser head. The blue laser head allows to cut or engrave materials such as wood, paper, leather, cardboard, and many others. Opt Lasers 2 W laser head is perfect for 3D printers.
This lightweight 70-gram laser head doesn’t require any additional cooling. Fan design makes it work as a fully customized air nozzle protecting the lens from dirt and cooling the laser head. PLH3D-2W works with common 12 V power supply (min. 1.5 A current).
The driver is equipped with an LED indicator, which displays all the required information. The temperature control system would turn off the laser head in case of exceeding critical temperature. The small-sized driver attached directly to the laser head improves the speed of diode modulation. This also allows connecting longer cables to the head.
Analog modulation enables the user to control the laser power. 0 V = laser OFF, 5 V laser ON, 2 V ~40% power. This can also work as TTL using a voltage from 0 to 5 V.
In order to modulate power through PWM, the base frequency has to be set between 5 and 10 kHz. Conducted thermal tests on several prototypes allowed us to optimize the radiator’s shape and enable efficient cooling, keeping up with a small size of the device. Besides the standard functionality, small sized laser spot gives the possibility to illuminate plates, covered with a photosensitive surface, which gives a chance for very quick PCB prototyping.
For bulk orders, PLH3D series CNC laser can be customized to all customers’ needs. The supply voltage may be switched to 24 V. We can add customers’ logos and all possible additional features.
Main advantages of the PLH3D-2W laser head
- Customization offer for all 3D printers and CNC machines producers
- No need for additional cooling
- Simple installation to all 3D printers and CNC routers
- The driver attached to the head
Our 2 W CNC laser can work with different CNC and 3D printing machines such as:
- CNC Shark
- GeckoDrive 540
- Openbuilds – C Beam/OX
- Shapeoko 2
- Shapeoko 3
- X-Carve Upgrade
- X Controller
- Zen Toolworks
- Azteeg X3
- MakerBot Thing-O-Matic
- MakerBot Replicator1 and Clones
- MakerGear M2
- PrintRBot Upgrade
- Replicator 2 and 2X
- RepRap – Melzi Board
- RepRap – RAMPS1.4
- RepRap – RUMBA
- Ultimaker 1 & 2
- Velleman K8200
PLH3D-2W laser head has a thermal protection system which protects laser diode from overheating.
The analog input is protected by a 5V1 Zener diode on occasion there appears the voltage higher than 5 V. Despite everything, this input should not be used with higher voltages.
The output of the driver is protected by Schottky diode which doesn't allow the reverse voltage to appear.
- Remember that it is not a toy.
- Laser radiation is dangerous even when scattered or reflected from any surface.
- Always use proper protection laser filter on your CNC machine dedicated to 430 - 480 nm in order to avoid reflected radiation.
- Never point laser head at people or animals.
- Do not touch the beam, it may cause burns.
- Do not stare at the beam or the beam spot while the material is being cut.
- Laser radiation - Avoid eye or skin exposure to direct or scattered radiation.
- Class 4 laser product.
|Dimensions||30 x 30 x 68,5 mm|
|Focal Length||20 - 120 mm|
|Focused Beam Spot Size @ 50 mm||0,1 x 0,1 mm|
|Focused Beam Spot Size @ 80 mm||0,1 x 0,18 mm|
|Input Voltage||12 V|
|Max. Power Consumption||15 W|
|Modulation Input Voltage Range||0 - 5 V|
|Modulation Type||Analog / TTL|
|Mounting Hole Spacing||20 mm|