High-Resolution Mounted Triplet Lens

This High-Resolution Lens can be used to variably focus or collimate the laser light with reduced aberration due to its triplet (three-element) design. Its long focal length of 8.0 mm allows it to variably focus laser light to a small spot. This lens can be purchased as a replacement for use with PLH3D-Series laser heads if the included one should become dirty. 

Reference: 001100

EAN13: 5902693110101

Available quantity: 185 Items

    $18.00 tax excl.

    Product Description

    - Easy to make fine adjustments of the focus spot size or working distance due to the rubber O-Ring and M9 x 0.5 mm thread
    - Anti-reflection (AR) coating at 450nm on all 6 lens surfaces permits high transmission
    - Long focal length allows high-resolution engraving
    - Replacement focusing lens for all PLH3D-Series laser heads

    This High-Resolution Lens can be used to variably focus or collimate the laser light with reduced aberration due to its triplet (three-element) design. Its relatively long effective focal length (EFL) of 8.0 mm allows it to focus laser light to a small spot.

    This lens is included with our PLH3D-Series laser engravers and is compatible with our PLH3D-Series Focus Adjuster accessory. It is easy to clean the front surface of the lens if it becomes dirty when engraving, which may be done with Isopropyl Alcohol (IPA) and an optical wipe. However, in some cases, it can be necessary to replace the lens. It is recommended to purchase additional lenses with PLH3D-Series laser heads if they will be used in an environment where dust, smoke or oil may contaminate the lens surface.

    Technical Data

    Design Wavelength450 nm
    Focal Length8 mm
    Mounting Hole Thread TypeM9 x 0,5