Introduction / Overview
Opt Lasers’ High-Power Laser Modules offer free-space, low divergence, unidirectional laser beams. Built with multiple high-power semiconductor laser diodes and precisely aligned optical components, these modules provide a highly stable, continuous wave performance with standard 402 nm or 450 nm wavelength. By using special beam shaping optics, the beam can be focused down to either a single spot or a line.
High Power Laser modules are an excellent fit for materials processing and engraving. Due to their compact designs, these laser modules can be easily integrated into CNC or galvo scanning systems. The 15W and 30W modules additionally offer optical isolation, making these lasers ideal for processing highly reflective materials. In applications where very high powers are not necessary, High Power Laser Modules offer the advantage of significantly speeding up the process.
Our R&D team is capable of designing customized solutions - different wavelengths, types of cooling etc. Feel free to contact us to discuss your application.
- High Optical Power
- Blue or Violet light (standard)
- Free-Space, Collimated Laser Beam
- Integrated Laser Diode Driver
- Compact, Dustproof Design
- Long Lifetime
- High speed modulation
Examples of Applications
- Material Processing
- Laser Powder Sintering
- Food Processing/Labeling/Marking
- Laser Soldering and Welding
- Plant, crop and weed laser processing
- Laser scanning
Beam spot of High-Power 50W Blue Galvo Laser Module is single mode in fast axis (vertical axis) and multimodal in slow axis (horizontal axis).
- Laser beam focused with 500mm focusing lens;
- Beam Profiler is placed in the focal plane;
- Focal plane is defined as smallest beam size in the fast axis;
- Laser operated in QCW, 100Hz 1ms pulse
High-Power 50W Galvo Laser Module is build with multiple laser diodes, every laser diode emits slightly different spectrum. As result emission spectrum of the laser module is relatively broad. For applications where narrower spectrum is required, laser diodes can be wavelength tested in prior to production so that when they are combined their spectrum matches.
High-Power 50W Galvo Laser Module has passive cooling with four high performance fans. Typical warm up time of the laser module is below 10 minutes. After warm up time power drift is negligibly small (assuming the ambient temperature is stable). Measured with IS12L-9S-RSI-INT-D0 at 23 degrees Celsius ambient temperature (stabilized)
High-Power 50W Galvo Laser Module has three LPLDD-5A-24V-TP laser diode drivers inside. Each laser diode driver is powering four laser diodes which are connected in series.
Signal: 1 kHz; 1% Duty Cycle; Square Wave; 5V Amplitude
Optical signal measured with Ultra-fast PIN Photodiode SFH 2701
Key Specifications for Standard Free-Space Modules
|Center Wavelength [nm]||402||450||450|
|Optical Power [nm]||15||30||50|
|Typ. Beam Size [mm, @ 1/e2]1||11 x 14||14 x 14||7.5 x 14|
|Typ. Full Angle Beam Divergence [mRad, @ 1/e2]1||0.7 x 0.8||0.8 x 0.8||0.2 x 10|
|Polarization State||TM||TM||TE + TM|
|Power Stability over 2h, %, with 10 min. warm up||< ±1|
|Lifetime||>10 000 h|
|Modulation Input [Analog]||0 - 5 V|
|-3 dB Bandwidth Modulation [kHz]2||>500|
|Softstart Time [ms]||2000|
|Rise Time [ns]||<1.5||0.3|
|Fall Time [ns]||<1.5||0.3|
|Operating Temperature [°C]||10 - 40|
|Dissipated Power [W, bottom surface]||<85||<110||<210|
|Max power consumption [W]||<150||<200||<300|
|OEM Module dimensions (L x W x H) [mm]||190 x 155 x 84||190 x 155 x 84||260 x 222 x 85|
|Module Weight [kg]||2.5||2.5||5|
1 Vertical x Horizontal.