Mounting with Magnetic Docking Station

1. Install the Magnetic Docking Station to the Opt Lasers PLH3D-6W Series Onefinity Mounting Plate.

Attach the female piece of laser dock to the Onefinity Mounting Plate using two M4 screws.

2. Install the Onefinity Mounting Plate to the Spindle Mount of your Onefinity machine using four M5 screws.

3. Install the male part of the docking station onto the laser module. Attach the Laser Dock using four M4 screws and connect the Laser Dock-Laser Head cable to the laser head and the male part of Laser Dock.

4. Attach Opt Lasers cutting laser by simply aligning the magnets. It will fit securely.

 When not in use, laser head should be removed. The docking station can then be covered with the provided cover.

A detailed video instruction for the whole installation process can be found on Youtube:

Make sure to subscribe to our Youtube channel for exciting first-hand news and video guides.

Mounting without Magnetic Docking Station

1. Install thePLH3D-series laser head to the Opt Lasers PLH3D-6W Series Onefinity Mounting Plate using four M3 screws.

2. Install the Onefinity Mounting Plate to the Spindle Mount of your Onefinity machine using four M5 screws.